To recover files from a RAW drive, do not format it and do not try to repair it first. A RAW drive is one whose file system Windows cannot read, but the files are usually still on it. Scan the drive with recovery software that can read damaged file systems or rebuild files from raw data, preview the results and copy everything to a different drive. Only then format or repair the RAW drive if you want to keep using it.
This guide explains what RAW means, how to confirm it, why CHKDSK will not help, and the safe order of steps.
What "RAW" means
RAW is not a file system. It is the label Windows uses when it finds a partition but cannot recognize the file system on it. Typical signs:
- Windows says "You need to format the disk in drive E: before you can use it."
- Disk Management shows the partition with the file system listed as RAW.
- The drive's Properties show 0 bytes used and 0 bytes free.
- Opening the drive gives an error such as "The volume does not contain a recognized file system" or "The file or directory is corrupted and unreadable."
- Running CHKDSK returns "The type of the file system is RAW. CHKDSK is not available for RAW drives."
To check for yourself, right-click Start, open Disk Management and look at the File System column for the drive.
What turns a drive RAW
| Cause | What happened | Recovery outlook |
|---|---|---|
| Unplugged while writing, or a power cut | The boot sector or file system records were left half written | Usually good |
| File system damage from a crash or malware | Key structures were corrupted | Usually good |
| Drive formatted on a Mac or Linux PC | The file system is fine, Windows just cannot read it | Use the original system; do not format |
| Encrypted drive that is locked | The data is encrypted and needs unlocking first | Unlock it with its own tool or key |
| Bad sectors on a failing drive | Areas holding the file system can no longer be read | Image the drive first; may need a lab |
| Faulty USB enclosure, cable or card reader | The connection garbles the data Windows sees | Try another cable, port or reader first |
Rule out the simple causes first. Try another cable, port or reader, and if the drive came from a Mac, a camera that uses an unusual format, or a TV recorder, check it on that device before assuming it is damaged.
Why you should not format or run CHKDSK first
Windows offers to format a RAW drive because formatting is the quickest way to make it usable. But a format writes a new file system over the area where the old file records live. A quick format usually still leaves the file data recoverable with a deep scan, but you lose the best chance of recovering names and folders.
CHKDSK does not run on RAW volumes at all. If the drive briefly becomes readable and CHKDSK does run, it can "fix" errors by removing damaged entries and moving fragments into a FOUND.000 folder, which often makes recovery harder. Recover first, repair afterwards.
If Windows pops up "You need to format the disk", click Cancel. Our guide to the "you need to format the disk" error covers the message itself in more detail.
How to recover files from a RAW drive
Drive Restorer handles RAW drives by reading what is left of the old file system or, if that is too damaged, scanning the raw data. Here are the steps:
- Connect the drive and click Cancel on any format prompt.
- Select the RAW drive in the list. It may show with a drive letter but no file system, or as a partition on the physical disk.
- Run a partition search and quick scan. If the old NTFS, FAT32 or exFAT structures can still be located, the files often come back with their original names and folders.
- Run a deep scan for anything missing. It reads every sector and finds files by their content, including photos, videos, documents and archives.
- Filter and preview. Use filters for type, size, date and name, open the preview, and check each file's recovery chance rating.
- Restore to a different drive. Save everything to another drive with enough free space. Drive Restorer never writes to the RAW drive while recovering.
On a large drive, the deep scan can take hours. You can save a scan and resume it later.
RAW drive that is also failing
If the RAW drive is slow, disconnects, clicks or shows read errors, physical problems may be the cause. Every full read puts more strain on it. The safer approach is to create a drive image, a sector-by-sector copy saved to another drive, and run the scans on the image. Drive Restorer can recover from a drive image so the failing drive is read only once. See how to recover data from a failing hard drive for the warning signs.
If the drive is not detected at all, or makes mechanical noises, a professional recovery lab is the right choice for important data.
After recovery: fixing the RAW drive
Once your files are safely copied to another drive and you have checked that they open:
- Decide whether you trust the drive. If the RAW state came from a power cut or unsafe removal, the drive itself may be fine. If it came from bad sectors, replace it.
- To reuse it, right-click the partition in Disk Management, choose Format, pick NTFS for an internal or Windows-only drive, or exFAT for a drive shared with other devices.
- Copy your recovered files back if you want them on that drive, and keep a second copy elsewhere.
If you are curious whether a format will erase your recovered drive for good, read quick format vs full format first.
Preventing RAW drives
- Always eject external drives, USB sticks and SD cards before unplugging them.
- Use a UPS or laptop battery so power cuts do not interrupt writes on desktop PCs.
- Replace cables and enclosures that cause random disconnects.
- Watch for early signs of drive failure, such as slow copying or files that will not open.
- Back up anything important to a second drive.
Frequently asked questions
What does it mean when a drive is RAW?
It means Windows cannot recognize the file system on the partition. The data is often still there, but the structure that tells Windows where each file is has been damaged or is unreadable.
Can CHKDSK fix a RAW drive?
No. CHKDSK reports that it is not available for RAW drives. Recover your files first, then format the drive if you want to reuse it.
Will formatting a RAW drive delete my files?
A quick format writes a new file system, which can overwrite some file records. Recover the files before you format, and never do a full format until you have them.
