Drive Restorer
Windows 10 & 11 Buy license · $29.95
Troubleshooting

"You Need to Format the Disk in Drive Before You Can Use It": How to Fix It

Windows says you need to format the disk before you can use it? Click Cancel. Here is what the error means, what to check and how to save your files first.

Updated 5 minute read The Drive Restorer team

When Windows says "You need to format the disk in drive E: before you can use it", click Cancel, not Format disk. The message means Windows cannot read the drive's file system, not that the drive is empty. Your files are very often still there. Check the simple causes first (connection, a Mac or encrypted drive), then recover the files with software that can read damaged drives, and only format the drive once everything is safely copied somewhere else.

This guide explains why the message appears, what to check, how to get your files off, and how to fix the drive afterwards.

What the message means

The full prompt reads: "You need to format the disk in drive E: before you can use it. Do you want to format it?" with the buttons Format disk and Cancel. If you click Cancel, you may then see "E:\ is not accessible. The volume does not contain a recognized file system."

Windows found a partition on the drive but could not make sense of the file system inside it. In Disk Management, such a partition usually shows its file system as RAW. Windows offers to format because formatting is the fastest way to make the drive usable again. It does not check whether you have files on it.

Why it happens

CauseHow to tellWhat to do
Drive unplugged without ejecting, or power lost mid-writeHappened right after an unsafe removal or crashRecover files, then reformat or repair
Drive formatted on a Mac (APFS or HFS+) or Linux (ext4)Drive was used with another computerOpen it on that computer; do not format
Encrypted drive that is lockedDrive was set up with encryption softwareUnlock it with the right tool and key
Faulty cable, USB port, hub or card readerWorks on another PC or with another cableReplace the faulty part
File system corruption from malware or a crashOther drives fine, this one suddenly unreadableRecover files, then reformat
Bad sectors or a failing driveSlow, disconnects, clicks or errorsImage the drive before anything else

Step 1: Check the simple things first

  1. Try a different USB port and cable. Use a port directly on the PC, not a hub, and the drive's own power supply if it has one.
  2. Try the drive in another computer. If it opens normally there, your first PC's port, driver or reader is the problem.
  3. Think about where the drive came from. A drive from a Mac, a TV recorder, a camera system or a Linux machine may be perfectly healthy in a format Windows cannot read. Open it on the original device and copy your files off there.
  4. Check for encryption. If the drive was encrypted, it must be unlocked before Windows can read it. Formatting would destroy the encrypted data.

Step 2: Do not format and do not run CHKDSK yet

It is tempting to click Format disk to make the error go away, or to run CHKDSK to repair it. Both can cost you files:

  • Format writes a new file system over the old file records. A quick format usually leaves the file data recoverable by a deep scan, but original names and folders are much harder to get back. A full format overwrites the drive with zeros.
  • CHKDSK will say "CHKDSK is not available for RAW drives" on a RAW partition. If the drive is only partly damaged and CHKDSK does run, it may remove damaged entries and leave fragments in a FOUND.000 folder.

Recover first. Repair or format second.

Step 3: Recover your files

Drive Restorer is built for this situation. It reads the old file system where it can, and scans the raw data when it cannot.

  1. Connect the drive and click Cancel on the format prompt every time it appears.
  2. Select the drive in the drive list. It may show with its letter but no file system.
  3. Run a partition search and quick scan. If the damaged NTFS, FAT32 or exFAT file system can still be found, files come back with their names and folders.
  4. Run a deep scan if files are missing. It reads every sector and finds files by their content.
  5. Preview important files and check their recovery chance ratings.
  6. Restore to a different drive, such as your PC's internal drive. Drive Restorer only reads the problem drive and never writes recovered files back to it.

For more detail on RAW drives specifically, see how to recover files from a RAW drive.

If the drive is slow, keeps disconnecting or makes clicking noises, stop scanning it directly. Create a drive image and recover from the copy, or consider a professional lab. Our guide to recovering data from a failing hard drive explains why.

Already clicked Format disk?

Do not panic, and do not put any new files on the drive.

  • If Quick Format was ticked (the default), the old data is usually still there. A deep scan can typically recover a large share of it, though often without original names.
  • If Quick Format was not ticked, Windows wrote zeros over the whole drive. Recovery is very unlikely.
  • If it is an SSD, Windows sends TRIM after formatting, which usually clears the data quickly. Chances are low.

Our guide to recovering data from a formatted hard drive covers this case in full.

Step 4: Fix the drive after your files are safe

  1. Open your recovered files from their new location and confirm the important ones are intact.
  2. Decide whether to keep using the drive. If the problem followed an unsafe removal or power cut, the drive is probably fine. If it has bad sectors or keeps happening, replace it.
  3. To reuse it, click Format disk on the prompt, or right-click the drive in Disk Management and choose Format. Choose NTFS for a Windows-only drive or exFAT for a drive you share with other devices, such as a TV or Mac.
  4. Copy your files back if you want them on this drive, and keep another copy elsewhere.

How to avoid seeing it again

  • Eject drives and cards before unplugging them, and wait for any copying to finish.
  • Use exFAT for drives you move between Windows and Mac, so both can read them.
  • Replace cables and card readers that cause random disconnects.
  • Keep a backup of anything stored on removable drives.

Frequently asked questions

What happens if I click Format disk?

Windows writes a new, empty file system to the drive. A quick format usually leaves the data recoverable, but it makes recovery harder, so click Cancel instead.

Why does Windows ask me to format a drive that has files on it?

Windows cannot read the drive's file system. Common causes are unsafe removal, a power cut during writing, a damaged partition, a failing drive or a format Windows does not support.

Can a drive formatted on a Mac cause this message?

Yes. Windows cannot read Mac-only formats such as APFS or HFS+ without extra software, so it offers to format them. Check the drive on the Mac before formatting.

Get three guides like this every month, plus software update notices.Subscribe →