Drive Restorer
Windows 10 & 11 Buy license · $29.95
Troubleshooting

Files Lost During Cut and Paste in Windows: How to Recover Them

Files lost after cut and paste or a move in Windows? Check both locations, use Undo and learn how to recover files when a move fails midway.

Updated 5 minute read The Drive Restorer team

If files were lost after a cut and paste in Windows, check both the source and the destination folders first, and press Ctrl+Z in File Explorer straight away if the move has just finished. Files that had not been moved yet when something went wrong usually stay in the source folder, and files that were already moved should be in the destination. If a move between two drives failed part way, for example when a USB drive was unplugged, the file being copied at that moment can be lost from both places, and a recovery scan of the source drive is the way to get it back.

Here is how moves work in Windows, where files end up when they go wrong, and how to recover them.

How cut and paste actually works

What Windows does depends on whether the source and destination are on the same drive:

Type of moveWhat Windows doesRisk
Same drive, for example C:\Users\You\Desktop to C:\Users\You\DocumentsUpdates the file's location in the file system. The data does not move.Very low. Interruptions rarely lose data.
Different drives, for example C: to a USB driveCopies each file to the destination, then deletes it from the sourceHigher. A failure mid-file can leave an incomplete copy.
From a phone or camera connected by USBTransfers over the device's media protocol, then deletes from the deviceHigher. Phone transfers are slower and less reliable.
To or from a network share or cloud folderCopies over the network, then deletes the sourceHigher on unstable connections

Cutting alone does nothing to your files. When you press Ctrl+X in File Explorer, the files stay where they are, slightly faded, until you paste. If you cut and never paste, or copy something else to the clipboard, the files are still in their original folder.

Step 1: Try Undo

If the move just happened and you have not done other file operations since, press Ctrl+Z in File Explorer, or right-click an empty part of a folder and choose Undo Move. Windows moves the files back. Undo works for the most recent file operations, so use it before you do anything else in File Explorer.

Step 2: Check both locations carefully

  1. Open the destination folder and sort by Date modified. Moved files keep their original modified dates, so also sort by name.
  2. Open the source folder. Files that were not moved yet when the operation stopped are usually still there.
  3. Check for an unexpected destination. A slip of the mouse while dragging can drop files into a nearby subfolder. Look inside folders next to where you meant to paste.
  4. Search for a file name you remember. In File Explorer, select This PC and type the name in the search box.
  5. Check that hidden items are visible: in Windows 11, View → Show → Hidden items.

If you dragged files to a different drive, Windows copies rather than moves by default. If you held Shift while dragging, or used cut and paste, they were moved. Knowing which you did tells you whether the source should still have them.

Step 3: Check the Recycle Bin and sync services

  • A move does not send files to the Recycle Bin, but if you deleted the source folder afterwards thinking the move had worked, the files may be there.
  • If either folder is synced with OneDrive or another cloud service, check the service's website and its recycle bin. A sync conflict during a move can make files appear in an unexpected place or with a changed name.

Step 4: Recover files lost in a failed move

When a move between drives fails part way, for example because the USB drive was unplugged, the PC lost power or the destination ran out of space, you can end up with files that are only partly written at the destination. Windows deletes source files only after copying them, so in most cases the source still holds anything that did not finish. The real losses happen when a destination copy that looked finished turns out to be damaged, for example because the drive was unplugged before its cache was written, while the source copy has already been deleted. In that case the original data may still be on the source drive.

Because the source deletion is an ordinary delete, the data is usually still on the source drive. To recover it:

  1. Stop writing to the source drive. Do not try the move again yet.
  2. Scan the source drive with Drive Restorer. A quick scan finds recently deleted files with their original names and folders.
  3. Browse to the source folder in the results, or filter by name and date.
  4. Preview the files to check they are complete. The recovery chance rating in Drive Restorer shows which are intact.
  5. Restore to a third location with plenty of space, not to the drive you are scanning.

If the source was a USB flash drive or SD card, the files did not go to the Recycle Bin when deleted, so a scan is the only way to get them back. See how to recover deleted files from a USB flash drive. If the destination drive now shows as RAW or asks to be formatted after being unplugged mid-move, do not format it; read how to recover files from a corrupted USB drive.

Moves from a phone

When you cut photos from an Android phone or move them with an import tool, the files are deleted from the phone after transfer. If the transfer was interrupted, check the phone's gallery and any "recently deleted" album first. Recovery software on Windows cannot scan a phone's internal storage over USB, because the phone appears as a media device, not as a drive. If the photos were on a microSD card in the phone, take the card out and scan it in a card reader.

A safer way to move important files

For anything you cannot afford to lose, do not cut. Copy instead:

  1. Copy the files to the new location with Ctrl+C and Ctrl+V.
  2. Check that the number of files and total size match. Select all in each folder and compare the details at the bottom of the window, or use Properties.
  3. Open a few files at the new location, especially large ones.
  4. Then delete the originals.

For large folders, the built-in robocopy command is more robust than File Explorer, because it can retry and resume. For example, robocopy "D:\Photos" "E:\Photos" /E copies everything, and you can run it again to pick up anything it missed. Always eject USB drives with Eject before unplugging, so the last files are fully written.

Frequently asked questions

Where do files go if cut and paste fails?

Files that had not been moved yet usually stay in the source folder. Files that were already moved should be in the destination. Check both.

Is it safer to copy than to cut?

Yes. Copy first, check the files open at the new location, then delete the originals. That way a failure never leaves you without a copy.

Can Ctrl+Z undo a move?

Yes, straight after the move. In File Explorer, Ctrl+Z moves the files back, as long as you have not done other file operations since.

Get three guides like this every month, plus software update notices.Subscribe →