To recover files from a corrupted USB flash drive, first try a different USB port and PC, then copy anything that is still readable. If the drive shows as RAW, asks to be formatted, shows empty or gives read errors, scan it with recovery software and restore the files to your PC before you repair or reformat it. Corruption usually damages the file system, not the files themselves, so the data is often still there. A drive that is not detected at all, or shows 0 bytes, may have a hardware fault that software cannot fix.
This guide covers the signs, the quick checks, the recovery itself and how to tell whether the drive is worth keeping.
Signs of a corrupted USB drive
| Symptom | Likely problem | Recovery outlook |
|---|---|---|
| "You need to format the disk" or RAW in Disk Management | File system damaged | Usually good |
| "The file or directory is corrupted and unreadable" | File system damaged | Usually good |
| Folders empty, or files with garbled names | File system damaged or files hidden | Usually good |
| Some files will not open or copy | Damaged files or worn flash cells | Varies by file |
| Wrong capacity, much larger or smaller than labeled | Counterfeit drive or damaged partition | Varies |
| "Please insert a disk into USB drive", or 0 bytes | Controller or hardware fault | Software cannot help; consider a lab |
| Not detected at all, no sound when plugged in | Hardware fault or broken connector | Software cannot help |
If the drive looks empty but its Properties still show space used, the files may only be hidden. See USB drive shows empty but has data before you go further.
Step 1: Quick checks before recovery
- Change the port. Use a USB port directly on the PC, not a hub or front-panel port, and try a USB 2 port if a USB 3 one gives errors.
- Try another PC. A driver problem on one PC can make a healthy drive look corrupted.
- Check Disk Management (right-click Start → Disk Management). Note whether the drive shows the right size, a drive letter and a file system such as FAT32, exFAT, NTFS or RAW.
- Assign a drive letter if the partition is healthy but has none: right-click it, choose Change Drive Letter and Paths → Add.
Do not click Format disk on the Windows prompt, and do not run CHKDSK yet. Both change the drive and can make your files harder to recover. Click Cancel.
Step 2: Copy what you can
If some folders open, copy the most important ones to your PC straight away, one folder at a time. If a file hangs, skip it. Flash drives with worn cells sometimes get worse with use, so prioritize what matters.
Step 3: Scan the drive and recover your files
Recovery software reads the drive directly instead of relying on the damaged file system. In Drive Restorer:
- Select the USB drive. If it has no letter or shows as RAW, choose it by its size and model.
- Run a quick scan to read what is left of the FAT32, exFAT or NTFS file system. Files often come back with their names and folders.
- Run a deep scan if folders are missing. It reads every sector and finds documents, photos, videos and archives by their content, even when the file system is unreadable. Files found this way usually lose their names, so filter by type and date.
- Preview important files and check their recovery chance rating.
- Restore to your PC or another drive, never to the USB drive.
If the drive also had files deleted before it became corrupted, the same scan finds those too. Our guide to recovering deleted files from a USB flash drive covers that case.
If the drive disconnects during scans or reads extremely slowly, image it to a file on your PC and scan the image instead, so the drive is read only once.
Step 4: Repair or reformat the drive
Once your files are safe and checked:
Try CHKDSK for minor errors
Open Command Prompt as administrator and run chkdsk E: /f, replacing E: with the drive's letter. This can fix small file system errors on FAT32, exFAT and NTFS drives. It will not run on a RAW drive.
Reformat for a clean start
Right-click the drive in This PC and choose Format. Use exFAT for drives used with Macs, TVs and cameras, FAT32 for older devices (with its 4 GB per-file limit), or NTFS for Windows-only use. If Format fails, use Disk Management: delete the partition, then create a new simple volume.
Test the drive
Copy a large batch of files to it and back, and check they open. If errors appear, the flash memory is failing and the drive should be replaced.
Counterfeit and fake-capacity drives
A drive sold as 256 GB or 1 TB for very little money is often a much smaller drive with modified firmware that reports a false capacity. It accepts files beyond its real size, but that data is never stored, so files appear corrupted or empty later. Recovery cannot bring back data that was never written. Signs include a suspiciously large capacity for the price, files that are fine at first and corrupt once the drive fills, and videos that stop playing part way. Use a capacity-testing tool to check new drives before trusting them.
What causes USB drive corruption
- Removing the drive while files are being written. Use Eject in File Explorer or the system tray first. Windows uses quick removal by default, but a copy that is still running is still running.
- Power cuts or a PC crashing during a write.
- Malware that hides or damages files. See recovering files deleted by a virus.
- Worn flash memory. Cheap drives used heavily for years eventually develop bad blocks.
- Physical damage to the connector, from a drive being knocked while plugged in.
When software is not enough
If the drive is not detected, shows 0 bytes, or asks you to insert a disk, the controller chip or the connector has likely failed. Recovery software needs the drive to present its storage to Windows, and in these cases it cannot. A data recovery lab can sometimes read the memory chip directly. Decide based on how valuable the files are, and in future keep a second copy of anything important that lives on a flash drive.
Frequently asked questions
What corrupts a USB flash drive?
Pulling it out while files are being written, power cuts, malware, worn-out flash memory and cheap or counterfeit drives are the most common causes.
Can I fix a corrupted USB drive without formatting?
Sometimes. CHKDSK can repair minor file system errors, but recover the files first because repairs can remove damaged entries.
Why does my USB drive show the wrong capacity?
Counterfeit drives report more space than they have and lose data written past their real size. Damaged partitions can also show the wrong size.
