You can usually recover files from a formatted SD card, as long as it was a quick format and you have not filled the card with new photos since. Formatting in a camera, phone or drone, and a quick format in Windows, only write a fresh, empty file system. The photos and videos stay on the card until they are overwritten, and a deep scan with recovery software can rebuild them. A full format in Windows is different: it writes zeros over the whole card, and recovery after that is very unlikely.
Here is how to tell which kind of format you did, what to do right now, and how to recover the files on a Windows PC.
Do this first
- Stop using the card. Do not put it back in the camera and keep shooting. New photos are written to the start of the freshly formatted card, which is exactly where your old photos are.
- Do not format it again to "fix" it, and do not run repair tools on it yet.
- Use a card reader to connect the card to your PC. If Windows asks you to format the card, click Cancel.
Which kind of format did you do?
| How it was formatted | What it does to the data | Recovery chance |
|---|---|---|
| Format in a camera, phone, drone or dashcam | Usually rewrites only the file system | Very good if not used since |
| Windows, with Quick Format ticked | Rewrites only the file system | Very good |
| Windows, Quick Format not ticked (full format) | Writes zeros to every sector (Windows Vista and later) | Very unlikely |
| Camera "low level format" option | Varies by maker; may erase the card | Uncertain |
| Formatted, then used for new photos or video | New files overwrite old ones | Partial |
In Windows, the Format dialog ticks Quick Format by default, so most accidental Windows formats are quick formats. Some cameras offer a separate low level or full format option. If you used that, the result depends on the camera, but treat it as a full erase and keep expectations low. Our explainer on quick format vs full format covers the difference in detail.
Why a deep scan is the right tool after a format
After a quick format, the old file table is replaced with a new, empty one. A quick scan, which relies on the file table, often finds little or nothing. A deep scan ignores the file table and reads every sector of the card, recognizing photos and videos by their content. JPG files, for example, always begin with the same bytes, and camera RAW files and MP4 videos have their own recognizable structures.
The trade-off is that files found this way usually lose their original names and folders. You will get the pictures back, but named by number. You can rename them later, or use the date in the photo's EXIF data to sort them.
How to recover a formatted SD card on Windows
These steps use Drive Restorer, which has a deep scan for formatted cards and lets you preview every photo before you restore it.
- Connect the card with a card reader and click Cancel if Windows offers to format it.
- Select the card in the list of drives. Check the size matches your card so you do not scan the wrong drive.
- Run a quick scan anyway. It only takes a moment, and sometimes it can still read parts of the old file system.
- Run a deep scan. This is the main step after a format. On a large card it can take some time. You can save the scan and resume it later if you need to stop.
- Filter by type and date. Show only JPG, your camera's RAW format or MP4 and MOV, and filter by date to find a particular shoot.
- Preview. Open photos and play videos in the preview. Each file has a recovery chance rating, from excellent to overwritten, so you know which ones are intact.
- Restore to your PC. Choose a folder on your computer's drive or an external drive. Never restore files back to the SD card.
Drive Restorer only reads the card during the scan, so you can scan more than once without risk.
Formatted the card and then kept shooting?
This is very common: the camera says "format card", you press OK, and carry on with the shoot. You can still recover a lot. New photos are written into the formatted card from the beginning, so they overwrite old photos roughly in proportion to how much you shot. If you took 2 GB of new photos on a 64 GB card that was nearly full, most of the old photos can still be there. Recover the new shoot as well, since it is on the same card and you want both sets safe.
Video is more sensitive than photos. A long clip that was partly overwritten may play only up to the damaged section or may not play at all.
When recovery will not work
Be realistic in these situations:
- Full format in Windows. The zeros written over the card leave nothing for software to find.
- The card was filled again. If you formatted it and then filled it with new photos or video, the old data is overwritten.
- The card is physically damaged or not detected by any card reader. Software needs the card to appear as a drive. A specialist lab can sometimes read the memory chip directly, at a much higher cost.
- The format was done by a device that erases the card, such as some security cameras and certain low level format options.
If the card is not showing up at all, work through our guide to an SD card not showing up in Windows before deciding it is dead.
A card that formatted itself, or that a camera reported as unusable and asked to format, may be failing. Recover what you can, then replace the card instead of trusting it with another shoot.
Recovering from microSD cards in phones, drones and dashcams
The process is the same for microSD cards. Put the card in an SD adapter or a USB microSD reader and scan it from Windows. A few notes:
- Phones: only photos saved to the microSD card can be recovered this way. Photos in the phone's internal storage are not on the card.
- Some Android phones offer to "format as internal storage". Cards set up that way are encrypted to the phone, so a PC cannot read the data on them.
- Drones and dashcams often record continuously and loop over old footage, so recover as soon as possible after a format.
For photos that were deleted rather than formatted, see our step-by-step guide to recovering deleted photos from an SD card.
Avoid formatting the wrong card again
Label your cards, keep a "full" and "empty" pouch so you never mix them up, and copy every card to two places before you format it in the camera. A quick check before pressing format takes seconds and saves a recovery session later.
Frequently asked questions
Can you recover photos after formatting an SD card in a camera?
Often, yes. Most cameras do a quick format that rebuilds the file system without erasing the photo data, so a deep scan can usually find the pictures.
What if I did a full format in Windows?
A full format in Windows Vista and later writes zeros to the whole card, which erases the old data. Recovery after a full format is very unlikely.
Should I put the card back in the camera after formatting?
No. Shooting new photos writes over the old ones. Keep the card out of the camera until you have recovered everything you need.
