Drive Restorer
Windows 10 & 11 Buy license · $29.95
Drives and devices

How to Recover Deleted Files From an External Hard Drive

Recover deleted files from an external hard drive or USB HDD on Windows. Check its Recycle Bin, avoid writing to it, then scan and restore safely.

Updated 5 minute read The Drive Restorer team

To recover deleted files from an external hard drive, first check the Recycle Bin while the drive is connected, because most external hard drives have their own bin. If the files are not there, stop saving to the drive, scan it with recovery software that reads without writing, preview the results and restore them to a different drive, such as your PC's internal drive. On a healthy hard drive, deleted files usually stay recoverable until they are overwritten.

The steps below also cover formatted external drives, drives that will not open, and the signs that a drive needs professional help rather than software.

Step 1: Check the Recycle Bin with the drive plugged in

Windows usually treats USB hard drives and external SSDs as fixed disks, so files deleted from them normally go to a hidden $RECYCLE.BIN folder on that drive. Its contents appear in the normal Recycle Bin, but only while the drive is connected.

  1. Connect the external drive and wait for it to appear in File Explorer.
  2. Open the Recycle Bin on your desktop.
  3. Switch to Details view and sort by Original Location to see items from the external drive's letter, for example E:\Photos.
  4. Right-click the items and choose Restore.

Items will not be there if you used Shift+Delete, if the folder was too large for the bin, if the drive's bin was emptied, or if the drive is set up as removable media. In those cases, move on to a scan.

Step 2: Protect the deleted data

  • Stop writing to the external drive. Do not copy new files to it or let backup software run to it.
  • Turn off automatic backups that target the drive, such as File History or third-party backup schedules, until you have finished.
  • Use a good connection. Connect directly to the PC, use the drive's own power supply if it has one, and avoid loose cables. Disconnects in the middle of a long scan are frustrating.
  • Listen to the drive. Clicking, grinding or repeated spin-up sounds mean physical trouble. Skip ahead to the section on failing drives.

Step 3: Scan the external drive and restore your files

These steps use Drive Restorer, which supports external hard drives as well as internal drives, USB sticks and SD cards.

  1. Pick the external drive in the drive list. Check its letter and size, especially if you have several external drives connected.
  2. Run a quick scan. It finds recently deleted files using the file system's records, usually with original names and folder paths.
  3. Filter the results by type, size, date and name. External drives often hold years of files, so filtering to a date range or a folder saves a lot of scrolling.
  4. Preview before restoring. Check photos, videos and documents in the preview and look at each file's recovery chance rating.
  5. Restore to another drive. Pick your PC's internal drive or a second external drive with enough free space. Never restore to the drive you are scanning.
  6. Deep scan for anything missing. The deep scan reads every sector and rebuilds files by content. On a multi-terabyte drive this can take hours, so you can save the scan and resume it later.

How long will scanning an external drive take?

Quick scans are fast because they read only the file system records. Deep scans read the whole drive, so time depends mostly on capacity and connection speed.

FactorEffect on deep scan time
Drive capacityA 4 TB drive takes roughly four times as long as a 1 TB drive
USB 2.0 vs USB 3.x portUSB 2.0 is far slower; use a blue or USB 3 labeled port where possible
Hard drive vs SSDExternal SSDs read much faster than spinning drives
Bad sectorsAreas that are hard to read slow the scan down considerably

To keep a long scan running smoothly, turn off sleep in Settings → System → Power while it runs, and plug a laptop into its charger. Windows can otherwise put the USB port or the PC to sleep halfway through.

If a scan slows to a crawl or the drive keeps disconnecting, stop. That pattern often points to a failing drive, and repeated reading can make it worse.

If the external drive was formatted or shows as RAW

Formatting an external drive with Quick Format ticked writes a new file system but leaves the old data in place. A deep scan can usually recover much of it. If the drive asks to be formatted when you plug it in, or Disk Management shows it as RAW, the file system is damaged rather than wiped. Click Cancel, do not run CHKDSK, and see our guide to recovering files from a RAW drive.

If the drive shows no partition at all, only unallocated space, the partition may have been deleted or lost. Drive Restorer's partition search can look for it. Our guide to recovering a lost partition explains the process.

If the drive is not detected or makes noises

Software can only scan a drive Windows can see. If the drive does not appear in File Explorer:

  1. Right-click Start and open Disk Management. If the drive appears there without a letter, right-click its partition and choose Change Drive Letter and Paths to add one.
  2. Try a different cable, port and computer.
  3. For desktop drives with a power adapter, check the adapter is connected and the drive spins up.

Our full guide to an external hard drive not showing up goes through every check.

If the drive clicks, grinds, beeps or was dropped, power it down. Every attempt to read a mechanically failing drive can damage it further. If it is still detected and the data matters, create a drive image first and recover from that copy, or take it to a professional data recovery lab.

Why external drives lose files

  • Unplugging without ejecting while files are still being written can damage the file system.
  • Drops and knocks are the most common cause of mechanical failure in portable hard drives.
  • Using one drive as the only copy. An external drive used for archiving is not a backup unless the files also exist somewhere else.
  • Sync and backup tools that mirror deletions from your PC to the external drive.

Once your files are safe, keep important archives on two drives, or on one drive plus cloud storage, and eject drives properly before unplugging them.

Frequently asked questions

Do external hard drives have a Recycle Bin?

Most external hard drives formatted as NTFS do, in a hidden $RECYCLE.BIN folder that shows in the normal Recycle Bin while the drive is connected. Check it first.

Can I recover files if the external drive is not detected?

If the drive does not appear in Disk Management at all, software cannot read it. Check the cable, port and power first. A drive that clicks or is not detected may need a professional lab.

Where should I save recovered files?

To a different drive, such as your PC's internal drive or another external drive. Never restore to the drive you are recovering from.

Get three guides like this every month, plus software update notices.Subscribe →