Drive Restorer
Windows 10 & 11 Buy license · $29.95
Photos and documents

How to Recover Deleted or Lost Drone Footage From a microSD Card

Recover deleted drone footage and photos from a microSD card on Windows, including after a format or a crash, and check each clip with a preview.

Updated 5 minute read The Drive Restorer team

To recover deleted drone footage, take the microSD card out of the drone, stop recording on it, and connect it to your Windows PC with a card reader. Scan it with recovery software that reads the card without writing to it, run a deep scan if the card was formatted, preview each clip and restore the files to your PC's drive. Before you scan, check whether your drone or its app kept a copy: some drones have internal storage, and many controller apps can cache a lower-resolution version of each clip.

This guide covers deleted clips, cards formatted in the drone and footage lost after a crash or a flat battery.

First, check for copies you may already have

A few minutes here can save you a scan entirely.

  • Internal storage. Some drone models have a few gigabytes of built-in storage and record there when no card is inserted, or when the card is full. Connect the drone to your PC by USB and look for a second storage device.
  • The controller app cache. Many drone apps have a setting to cache video while recording. If it was on, a lower-resolution copy may be on your phone or smart controller, in the app's album or cache folder.
  • Your PC and cloud. If you imported the card before, check your import folder, the Recycle Bin and any cloud photo service that syncs your phone.
  • Proxy files on the card. Some drones write small low-resolution proxy files (for example with an .LRF extension) alongside each main clip. If only those survive, they are better than nothing.

Why deleted footage is usually still on the card

Drone microSD cards use exFAT (or FAT32 on small cards). When a clip is deleted, or the card is quick-formatted in the drone, the file table entry goes but the video data stays in place until new recordings are written over it. That is why the single most important step is to stop flying with that card. Every new flight writes gigabytes of data and can overwrite exactly the clips you want back.

How to recover drone footage step by step

These steps use Drive Restorer, which scans SD and microSD cards read-only and previews videos before you restore them.

  1. Remove the card from the drone. Use a spare card for any flights until recovery is done.
  2. Use a card reader. Put the microSD card in a USB card reader, or in a full-size SD adapter in your laptop's slot. Avoid connecting the drone itself, because the drone may write to the card when it powers on.
  3. Cancel any format prompt. If Windows says the card needs to be formatted, click Cancel.
  4. Select the card and run a quick scan. Recently deleted clips often appear with their original names, such as DJI_0042.MP4, in the DCIM folders.
  5. Run a deep scan if the card was formatted, if clips are missing, or if the card shows as RAW. The deep scan reads every sector and recognizes videos and photos, including DNG stills, by their content.
  6. Filter by type (MP4, MOV, JPG, DNG) and by date to find the flight you need.
  7. Preview the clips. Play them in the preview and check the recovery chance rating for each one.
  8. Restore to a folder on your PC, such as D:\Recovered\Drone. Never restore to the card.

Cards of 128 GB or more take time to deep scan. Save the scan if you need to stop, and resume it later.

What you can expect to recover

What happenedBest scanLikely outcome
Clips deleted in the app or on the PC, card not used sinceQuick scanVery good, often with names
Card formatted in the droneDeep scanGood, usually without original names
Card formatted, then more flights recordedDeep scanPartial. Older clips may be overwritten
Card shows as RAW or asks to be formattedQuick scan, then deep scanUsually good
Last clip cut off by a crash or flat batteryDeep scanData often found, but the file may not play
Card cracked or not detected by any readerNoneNeeds a professional lab

Footage from a crash or sudden power loss

MP4 and MOV files are written in two parts: the video data as it is recorded, and an index that tells players how to read it, which is usually written when recording stops. If the drone lost power mid-recording, that index may never have been written.

  • A recovery scan can often find the video data, but a clip without its index may not play in a normal player.
  • Some drones repair the last clip automatically the next time a card is inserted and the drone powers on. That writes to the card, so recover the files to your PC first, then let the drone try its repair afterwards.
  • Video repair tools that rebuild the index from a working sample clip recorded with the same settings exist as a separate category. Drive Restorer recovers files; it does not repair a damaged video's structure.

If the card was damaged in the crash, for example cracked or bent, do not force it into a reader. A data recovery lab can sometimes read the memory chip directly.

Large video files and fragmentation

4K drone clips can be several gigabytes each, and many drones split long recordings into a series of files around 4 GB each. A deep scan identifies files by their content, so very large clips on a card that has been filled and emptied many times may come back incomplete if the file was stored in scattered pieces. Use the preview to play recovered clips through to the end, and restore the best copy of each flight. Our guide to recovering deleted videos explains more about how video files behave during recovery.

Card not showing up on your PC?

Try a different reader and a different USB port before anything else. Cheap microSD adapters fail more often than the cards themselves. If the card still does not appear, open Disk Management and look for it without a drive letter. Our guide to an SD card not showing up in Windows covers the full set of checks.

Protecting future flights

  • Copy each day's footage to your PC and a second backup before formatting the card.
  • Format the card in the drone, not on the PC, before each flying session once it is backed up.
  • Use a fast, branded card that meets your drone maker's speed recommendation. Slow cards can cause dropped or corrupted recordings.
  • Keep a spare card in your kit so you never have to fly on a card you are hoping to recover.

Frequently asked questions

Can I recover drone footage after formatting the card in the drone?

Often, yes. In-drone formats are usually quick formats, so a deep scan can find many clips, as long as you have not recorded over them.

Why is my last drone clip corrupted after a crash?

If power was lost while recording, the video may not have been closed properly. Recovery can sometimes find the data, but the file may need repair to play.

Does my drone keep a copy of the footage?

Some drones have internal storage or save low-resolution copies to the controller app. Check those before scanning the card.

Get three guides like this every month, plus software update notices.Subscribe →